Proceedings of International Conference
Proceedings of The Conference on High Strength Steels for Hydropower Plants.
July 20 to 22, 2009 at Takasaki, Japan
- 1. Contents
- 2. Preface
- 3. Papers
- 1.Construction of Steel Penstocks using HT100 at Kannagawa Hydropower Plant Aoki, K. / Minami, M.
- 2.Qualification Program for the Rehabilitation of Cleuson-Dixence: Requirements and Results Cerjak, H. / Chene, O. / Enzinger, N. / Roos, E.
- 3.Application of Extra-High Tensile Strength Steel for Hydropower Plants in Japan Horikawa, K. / Watanabe, N.
- 4.Current Hydro Power Plant Projects of Verbund in Austria and the use of High Strength Steel - an Operators View Mayrhuber, J. / Stering, P.
- 5.Welding Reparation on Thermo-mechanical HSS Guyot, S. / Dubois, J.M. / Bryla, P.
- 6.Development and Application of 950MPa and 780MPa class High Strength Steel for Penstock Tsuzuki, T. / Kawabata, N. / Okushima, M. / Tokunoh, K. / Okamura, Y.
- 7.Development and Application of Welding Consumables for 950MPa class High Strength Steels Hara, N. / Sato, M.
- 8.Welding Processes for the Cleuson-Dixence Shaft Chene, O.
- 9.Non Destructive Testing of the Cleuson-Dixence Shaft Faessel, C.
- 10.Effects of Heat Control on the Stress Build Up during High Strength Steel Welding under Defined Restraint Conditions Kannengiesser, Th. / Lausch, Th. / Kromm, A.
- 11.Residual Stress Distribution in Competing S 1100 QL Butt-Welds Dependent on Plate Thickness and Restraint Length Wongpanya, P. / Boellinghaus,T.
- 12.Fatigue Improvement of HSS Welded Elements by Ultrasonic Peening Kudryavtsev, Y. / Kleiman, J. / Iwamura, Y.
-
13.Mechanical Discussion on 950 MPa Class Steel Plate Welded Joint for Penstock
Report 1: Characteristics of Deformation and Strength by Numerical Welding Stress-Strain Simulation Considering Microstructural Effect Mochizuki, M. / Kitano, H. / Okano, S. / Kawabata, T. / Sakaibiri, H. -
14.Mechanical Discussion on 950 MPa Class Steel Plate Welded Joint for Penstock
Report 2: Effect of Welding Conditions on Brittle Fracture Behavior and Fracture Assessment Kawabata, T. / Sakaibori, H. / Onishi, K. / Mochizuki, M. - 15.Modeling of Phase Transformation in Cooling Process and Verification of Its Validity Kim, Y. C. / Hirohata, M. / Hageyama, Y.
- 4. Minutes of discussions
- 5. Supplemental Essay
Precautions before reading these documents.
The copyright of these documents including the proceedings is held by the Japan Electric Power Civil Engineering Association and protected by the copyright law and the international agreements.
It is an infringement of copyright and results in suffering of legal punishment to copy, transmit, broadcast, distribute, translate and alter this document without permission of the copyright holder.
AdobeReader6 or its higher version is necessary for reading these documents.
